Lawrenceville, Georgia    


Custom Work


Contact / About


Contemporary Stainless Steel  Metal Wall Art Sculpture 31L Custom

Lawrenceville, Georgia

This is an original hand formed metal wall sculpture that was designed and built by me, Richard Walker.  I put an enormous amount of time and effort into these pieces to make sure that they are the finest sculptures that are available anywhere.  Each piece is completely hand cut and precision welded.  As you can see, they are three dimensional.  These sculptures stand off of the wall and are designed to allow light to pass through them.  Another thing you will notice is the finish.  Only the highest quality paints are used.  All the colors are custom mixed and can not be found anywhere else.  Hours are spent painstakingly hand polishing these pieces to a mirror finish.  The depth and clarity of these finishes are unbelievable.  When you take a close look at these pieces you can see how all the time, effort, and high quality materials make these pieces stand apart from all the rest.  

Feel free to let me know if you have any questions.




Prices and sizes listed below

Stainless Steel Construction

100% Stainless Steel,  Precisely Hand Cut and Expertly Welded.  Extremely sturdy construction.

Sculpture Colors   Gloss black oak design and hand textured stainless steel.
 Paint Details

Mirror Finish -- The paint is painstakingly polished to a Mirror Finish -- The gloss is so deep that these pieces look Wet

Metallic -- The paint contains tiny metal particles. The colors lighten and darken depending on how much light is hitting them.

Colors are Custom Mixed -- they are not available anywhere else

Wall Mounting -- Indoors

This sculpture comes ready to hang.  Sculptures are designed to be mounted Indoors.  Mounting hardware is included!  All you need is a Hammer to hang these on your wall!

Original Design

These sculptures are designed, built, and painted by me, Richard Walker.  All pieces are signed and dated.  

Options   This piece can be custom built in larger sizes.  Many more colors are also   available.  Please see my Color Selection Page.  --Additional charges apply--
20" x 20" 16" x 16"
$340 + 22s/h $295 + 18s/h
30" x 30" 24" x 24"
$765 + 45s/h $485 + 35s/h

This piece stands away from the wall 1.75 inches


Galleries:  Large Pieces, Metallic Blue Designs, Metallic Red Designs, Mountain Landscapes, Silver Designs, Gloss Black Designs, Lighted Designs, Textured Finish Pieces, Freeform Designs, Table Top Pieces, Round Bar Designs, Drawing Gallery, Mosaic Gallery

New -- Master Sculpture Directory --  Links to all Galleries on this Website

I have done this design in a couple ways, see the links below for more photos:

  31L custom, 6k, 8k, 31L

More colors are also available, metallic red, gloss black, pearl white, etc.   

The photos below are of a 30 x 30 inch version of my 31L design.

This sculpture is built entirely out of stainless steel.  The polished bars you see between each of the 4 panels actually run the entire length and width of the piece on the back side.  I make these pieces as rigid as possible, especially in larger sizes.  There are more than 30 welds that hold this piece together.

The wavy textured stainless steel finish was done by hand and then the oak tree design was painted.  I then sprayed multiple layers of automotive grade clear coat over the entire piece.  After the paint cured it literally took days to hand polish the finish in a 5 stage process.  The finish is amazing and you can see the clarity of the finish in the photos with the reflection from the chandelier.  

Please see the links above for more variations and more photos of this design.  Sizes ranging from 16x16 up to 30x30 are available.  This sculpture stands away from the wall 1.75 inches.  Prices are listed above.  Please contact me for custom orders or variations of this design.


Sculpture 31L Custom

The reflection of the chandelier really shows how highly polished the finish is on this sculpture.  It literally takes days of polishing to achieve this look.