Lawrenceville, Georgia    


Custom Work


Contact / About


Contemporary Stainless Steel  Metal Wall Art Sculpture 14T Variation 1

Lawrenceville, Georgia

This is an original hand formed metal wall sculpture that was designed and built by me, Richard Walker.  I put an enormous amount of time and effort into these pieces to make sure that they are the finest sculptures that are available anywhere.  Each piece is completely hand cut and precision welded.  As you can see, they are three dimensional.  These sculptures stand off of the wall and are designed to allow light to pass through them.  Another thing you will notice is the finish.  Only the highest quality paints are used.  When you take a close look at these pieces you can see how all the time, effort, and high quality materials make these pieces stand apart from all the rest.  

Feel free to let me know if you have any questions.




This was a custom piece

Stainless Steel Construction

100% Stainless Steel,  Precisely Hand Cut and Expertly Welded.  Extremely sturdy construction.

Sculpture Colors  Textured weathered dark gray and gloss textured stainless steel
 Paint Details

Textured Finish with clear-coated stainless

Wall Mounting -- Indoors

This sculpture comes ready to hang.  Sculptures are designed to be mounted Indoors.  Mounting hardware is included!  All you need is a Hammer to hang these on your wall!

Original Design

These sculptures are designed, built, and painted by me, Richard Walker.  All pieces are signed and dated.  

Options   This piece can be custom built in larger sizes.  Many more colors are also   available.  Please see my Color Selection Page.  --Additional charges apply--

Please contact me

This piece stands away from the wall 1.75 inches


Galleries:  Large Pieces, Metallic Blue Designs, Metallic Red Designs, Mountain Landscapes, Silver Designs, Gloss Black Designs, Lighted Designs, Textured Finish Pieces, Freeform Designs, Table Top Pieces, Round Bar Designs, Drawing Gallery, Mosaic Gallery

New -- Master Sculpture Directory --  Links to all Galleries on this Website

This was a custom version of design 14T that had an extra row added.  The right portion is coated in a textured dark gray and the circular panels have a hand textured stainless finish that has been clear coated and polished.

The original version can be seen here:  Design 14T

The colors on this piece can be changed, usually at no additional cost when using a textured finish.  To view more designs with the textured finishes, please see:  Textured Pieces Gallery

For a gloss variation of this sculpture, please see design:  5B

This sculpture is built entirely out of stainless steel.  Each circular and rectangular panel are precision cut.  The polished bars you see between each of the 6 panels actually run the entire length and width of the piece on the back side.  I make these pieces as rigid as possible, especially in larger sizes.  There are more than 25 welds that hold this piece together.

The paint on the right side of this piece has a textured finish, like sand.  The circular panels are hand textured stainless steel that has been clear-coated and polished to have a gloss finish.  For a more organic look, the circular panels can be without the clear-coat.  They would have the same color but would have a satin finish without the gloss. 

Two or more of these sculptures can be placed together to increase the width.  Four of these sculptures could be mounted in a square configuration like sculpture: 54L  The largest that each individual piece can be built is 30" x 30".  

Sizes ranging from 16x16 up to 30x30 are available.  This sculpture stands away from the wall 1.75 inches and comes ready to hang.  All you need is a hammer.  This was a custom piece, a variation of my 14T design.  Please contact me to have a custom piece built.


Sculpture 14T Variation 1


An extra row was added to this piece.


Textured finish on the right, clear coated stainless steel circles on the left.