Contact / About
Contemporary Metallic Red Metal Wall Art Sculpture
Contact Us: RICHARD@GEORGIAMETALART.COM
is an original hand formed metal wall sculpture that was
designed and built by me, Richard Walker. I put an enormous
amount of time and effort into these pieces to make sure that they
are the finest sculptures that are available anywhere. Each
piece is completely hand cut and precision welded. As you can
see, they are three dimensional. These sculptures stand off of
the wall and are designed to allow light to pass through them.
Another thing you will notice is the finish. Only the highest
quality paints are used. All the colors are custom mixed and
can not be found anywhere else. Hours are spent painstakingly
hand polishing these pieces to a mirror finish. The depth and
clarity of these finishes are unbelievable. When you take a
close look at these pieces you can see how all the time, effort, and
high quality materials make these pieces stand apart from all the
free to let me know if you have any questions.
Wide by 16 inches Tall by 1.75 inches deep
100% Stainless Steel, Precisely
Hand Cut and Expertly Welded. Extremely sturdy construction.
This sculpture has an amazing Gloss Metallic Red finish and
polished with hand textured stainless steel sections and
polished stainless steel round bar
-- The paint is painstakingly polished to a Mirror Finish -- The
gloss is so deep that these pieces look Wet
The paint contains tiny metal particles. The colors lighten and
darken depending on how much light is hitting them.
Colors are Custom
Mixed -- they are not available anywhere else
Mounting -- Indoors
This sculpture comes ready to hang.
Sculptures are designed to be mounted Indoors. Mounting
hardware is included! All you need is a Hammer to hang these
on your wall!
These sculptures are designed, built, and
painted by me, Richard
Walker. All pieces are signed and dated.
|| A certificate of authenticity will be included with this sculpture.
piece can be custom built in larger sizes. Many more colors
are also available. Please see my Color
Selection Page. --Additional charges apply--
x 16" x 1.75"
x 20" x 1.75"
x 24" x 1.75"
Blue Designs, Metallic
Red Designs, Mountain
Landscapes, Silver Designs, Gloss
Black Designs, Lighted Designs,
Textured Finish Pieces,
Freeform Designs, Table
Top Pieces, Round Bar Designs,
Drawing Gallery, Mosaic
-- Master Sculpture Directory -- Links to all Galleries on this
I have built this design in a variety of colors and sizes. Take a look
at these links for some variations:
More colors are also available, metallic blue, gloss black, pearl white, etc.
This piece is actually comprised of 2 pieces, each measuring
16.5" wide by 16" tall. When placed together both pieces are a
little more than 33" wide. All of the rectangular panels are
precision cut stainless steel. Stainless steel round-bar is used as the
framework on the back of this sculpture as well as part of the design on the
front of the piece. While only about 1" of the round bar is
visible, the bars actually extend the entire length of the back sides of the
piece. Alternating metallic red and textured stainless steel panels are
used. This piece has 7 coats of the highest quality automotive grade
painting I hand polish the clear-coat to a near mirror finish. This piece
is designed to hang on a wall and comes ready to hang. All you need is a
hammer. I have also built this piece in gloss black and metallic
More 16" x 16" pieces can be added to increase the width of this
design or to change the configuration of this piece. The largest that
each individual piece can be built is 24" x 24". I set up a
page that shows how I measure this design: How
Pieces Are Measured . To see a variation of this
sculpture with four panels, please see design: 54L
In the photo above you can see how highly
polished the finish is. It literally takes days to achieve this.
The photo above shows the solid stainless
steel framework on the back side of this sculpture.