Lawrenceville, Georgia    


Custom Work


Contact / About


Contemporary Metal Wall Art Sculpture 4L

Lawrenceville, Georgia

This is an original hand formed metal wall sculpture that was designed and built by me, Richard Walker.  I put an enormous amount of time and effort into these pieces to make sure that they are the finest sculptures that are available anywhere.  Each piece is completely hand cut and precision welded.  As you can see, they are three dimensional.  These sculptures stand off of the wall and are designed to allow light to pass through them.  Another thing you will notice is the finish.  Only the highest quality paints are used.  All the colors are custom mixed and can not be found anywhere else.  Hours are spent painstakingly hand polishing these pieces to a mirror finish.  The depth and clarity of these finishes are unbelievable.  When you take a close look at these pieces you can see how all the time, effort, and high quality materials make these pieces stand apart from all the rest.  

Feel free to let me know if you have any questions.




48 inches Wide by 16 inches Tall by 1.75 inches deep

Stainless Steel Construction

100% Stainless Steel,  Precisely Hand Cut and Expertly Welded.  Extremely sturdy construction.

Sculpture Colors   The panels have a hand texture stainless steel   finish.  The stainless steel round-bar framework is unpainted.
 Paint Details

Mirror Finish -- The paint is painstakingly polished to a Mirror Finish -- The gloss is so deep that these pieces look Wet

Wall Mounting -- Indoors

This sculpture comes ready to hang.  Sculptures are designed to be mounted Indoors.  Mounting hardware is included!  All you need is a Hammer to hang these on your wall!

Original Design

These sculptures are designed, built, and painted by me, Richard Walker.  All pieces are signed and dated.  

Options   This piece can be custom built in larger sizes.  Many more colors are also   available.  Please see my Color Selection Page.  --Additional charges apply--
48" x 16" x 1.75" 60" x 20" x 1.75" 72" x 24" x 1.75"
$690 + 25s/h $1068 + 45s/h $1538 + 65s/h


Galleries:  Large Pieces, Metallic Blue Designs, Metallic Red Designs, Mountain Landscapes, Silver Designs, Gloss Black Designs, Lighted Designs, Textured Finish Pieces, Freeform Designs, Table Top Pieces, Round Bar Designs, Drawing Gallery, Mosaic Gallery

New -- Master Sculpture Directory --  Links to all Galleries on this Website

To see other pieces that have the same hand textured clear-coated stainless steel finish, please see designs:


This piece is also available without the clear-coat.  It would have a satin finish without the clear-coat.   


This is a very unique metal wall art design.  Unlike many of my metal sculptures, this piece does not have any paint, only clear-coat.  What you see is actually 3 pieces, each measuring about 16in x 16in.  Each piece has 2 square holes cut in it.  There is a sturdy stainless steel round bar frame on the back side of each textured panel.  Each square hole is hand cut.  I hand texture each panel with vertical lines.  I did vertical lines on this piece because they catch light better than horizontal lines.  After texturing, this piece of metal wall art is then coated in multiple coats of automotive grade clear coat which is then hand polished in a 5 stage process.

I build metal wall art to order so changes can always be made to a design.  On this particular piece more panels can be added to extend the width or I can change the pattern of the square holes.  As shown below, there are 3 individual pieces mounted side by side.  Another piece could be added to it could be hung in a square configuration with 2 pieces
on top and 2 pieces on the bottom.  There are many options.

More 16" x 16" pieces can be added to increase the width of this design or to change the configuration of this piece.  The largest that each individual piece can be built is 24" x 24".  With four 24" x 24" panels, this piece would be 96 inches wide.  Prices and sizes are listed above.  

The square panels have a hand textured stainless steel finish that has been clear-coated and polished.  This piece is designed to hang on a wall and comes ready to hang.  All you need is a hammer.  

Sculpture 4L

Georgia Metal Wall Art

The floor lamp reflection shows the gloss of the polished clear-coated finish.